• Post time: 04-28-2018

    Read more »

  • Post time: 04-16-2018

    Aluminum alloy die casting has the advantage that some other castings can not be compared, such as beautiful, light weight, corrosion resistance and other advantages, making it widely favored by users. Aluminum alloy die casting, especially in the light weight of the car, cast aluminum alloy cast...Read more »

  • Post time: 04-08-2018

    In the casting process of aluminum alloy die casting, due to various factors, some defects may occur. Therefore, we need to learn and understand some of its relevant knowledge, know the causes of problems and solutions, reduce the scrap rate of aluminum die castings, and improve the quality of al...Read more »

  • Post time: 03-27-2018

    At present, in the mold manufacturing, EDM, forming grinding, wire cutting and other new processes have been applied, which have solved the problems of complex mold processing and heat treatment deformation. However, these new processes have not been universally applicable due to various conditio...Read more »

  • Post time: 03-20-2018

    Product model processing completed! Read more »

  • Post time: 03-14-2018

    Die casting is the most widely applied technology, the fastest developing technology, the most advanced technology and the highest efficiency of precision parts manufacturing technology. It adapts to the trend of product sophistication, precision, light weight, energy saving and environmental pro...Read more »

  • Post time: 03-08-2018

    Casting poor air tightness refers to the internal pressure to a certain pressure, the casting from the internal or external leakage, resulting in pressure drop, such castings if put into use, It may show as oil spills, leaks, leaking water, etc; Poor air tightness is one of the difficult problems...Read more »

  • Post time: 03-02-2018

    In the metal forging process, thermal and mechanical energy – in the form of heat, and compressive and percussive force, respectively – is applied to a piece of metal, generally an ingot or billet.   Metal forging, among the oldest metalworking processes, can be performed cold (at or near ro...Read more »

  • Post time: 01-31-2018

    Despite the continuous progress of lightweighting of steel and the increasing discussion on the application of carbon fiber composite materials, aluminum has not been excluded as the light-weight material in the automobile industry but instead has been vigorously promoted. Ford Motor Company intr...Read more »

  • Post time: 01-24-2018

    (1) requirements for the design tendons of castings: The reinforcing effect is thin wall thickness change, in order to improve the strength and rigidity of the parts, to prevent and reduce the casting shrinkage deformation, avoid the workpiece ejection from the mold when deformed, filled with aux...Read more »

  • Post time: 01-24-2018

    The following problems often occur in cleaning and polishing the residual stains on the surface of the die casting. Cleaning is poor, not completely Stimulate the skin, hand injury problems The cleaning out there will be corrosion, mildew problems Cleaning in short time and discharge and the use ...Read more »

  • Post time: 01-23-2018

    During the casting process of aluminum alloy die casting parts, some parts are filled with incomplete filling, which is called incasting. But not cast, is one of the common defects of aluminum castings. Its specific performance is that the casting is insufficient, the outline of the casting is no...Read more »

123 Next > >> Page 1 / 3
WhatsApp Online Chat !